XEPC.org XEPC.org
與您分享有關華碩 Eee PC 的最新消息、軟硬體知識跟教學文章。
為您介紹更好用的 Eee PC 新軟體，幫助您的 Eee PC 無限延伸...

最近更新時，忽然跳出需要公鑰的畫面
安裝好之後
開始讀不到內建讀卡機的(任一記憶卡)，電腦表示權限不足，放到外接讀卡機又沒問題…
請問怎麼辦

By hugocc on Mar 28, 2008

都無法讀取MMC-SD
以前目錄會看到MMC-SD，現在在home/user/都看不到
檔案管理員則是顯示一個像是斷掉鍊條的圖示
主畫面右下角則顯示MMC-SD 0K

我重灌epc之後
用舊的XEPC光碟升級，
然後沒辦法成功安裝lazyeeepc 0051
接著不斷嘗試一些sudo apt-get…
結果就亂了

By hugocc on Mar 28, 2008

萬分感謝
問題解決了

請教這個升級和lazyeeepc的多媒體昇級有何不同?

By hugocc on Mar 29, 2008

你好，我是來自香港的小兔。

剛買了一台EEEPC 900，由lazyEEEPC懶包中安裝XEPC上的mplayer 0.6.0rc3。我把整片DVD的內容抄入/home/user下面，未裝0.6.0rc3可播，裝了不可播。

Error Log為：

/usr/bin/mplayer -noquiet -nofs -sub-fuzziness 1 -identify -slave -vo x11 -ao oss -zoom -nokeepaspect -framedrop -hardframedrop -autosync 100 -input conf=/usr/share/smplayer/input.conf -stop-xscreensaver -wid 33554446 -monitorpixelaspect 1 -subfont-autoscale 1 -subfont-text-scale 5 -subcp BIG5 -aid 128 -subpos 100 -contrast 0 -brightness 0 -hue 0 -saturation 0 -dvd-device /home/user/My Documents/My Videos/Delirious -chapter 2 -dvdangle 1 -nocache -osdlevel 0 -softvol -softvol-max 110 dvd://3

MPlayer 1.0rc1-4.1.2-DFSG-free (C) 2000-2006 MPlayer Team
CPU: Intel(R) Celeron(R) M processor 900MHz (Family: 6, Model: 13, Stepping:
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Warning unknown option ao_driver at line 12
Warning unknown option ao_alsa_mixer_channel at line 13
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing dvd://3.
ID_DVD_TITLES=5
ID_DVD_TITLE_1_CHAPTERS=1
ID_DVD_TITLE_1_ANGLES=1
ID_DVD_TITLE_2_CHAPTERS=1
ID_DVD_TITLE_2_ANGLES=1
ID_DVD_TITLE_3_CHAPTERS=18
ID_DVD_TITLE_3_ANGLES=1
ID_DVD_TITLE_4_CHAPTERS=1
ID_DVD_TITLE_4_ANGLES=1
ID_DVD_TITLE_5_CHAPTERS=1
ID_DVD_TITLE_5_ANGLES=1
ID_DVD_TITLE_1_LENGTH=324.700
ID_DVD_TITLE_2_LENGTH=119.867
ID_DVD_TITLE_3_LENGTH=5193.033
ID_DVD_TITLE_4_LENGTH=1831.133
ID_DVD_TITLE_5_LENGTH=491.333
ID_DVD_DISC_ID=8DA343207AF201D4F4B76BA22839DAF2
There are 5 titles on this DVD.
ID_DVD_CURRENT_TITLE=3
There are 18 chapters in this DVD title.
There are 1 angles in this DVD title.
audio stream: 0 format: ac3 (stereo) language: aid: 128.
ID_AUDIO_ID=128
audio stream: 1 format: ac3 (5.1) language: aid: 129.
ID_AUDIO_ID=129
audio stream: 2 format: dts (5.1) language: aid: 138.
ID_AUDIO_ID=138
number of audio channels on disk: 3.
subtitle ( sid ): 0 language:
ID_SUBTITLE_ID=0
subtitle ( sid ): 1 language:
ID_SUBTITLE_ID=1
number of subtitles on disk: 2
ID_AUDIO_ID=138
ID_VIDEO_ID=0
ID_AUDIO_ID=128
ID_AUDIO_ID=129
MPEG-PS file format detected.
VIDEO: MPEG2 720×480 (aspect 3) 29.970 fps 7700.0 kbps (962.5 kbyte/s)
ID_FILENAME=dvd://3
ID_DEMUXER=mpegps
ID_VIDEO_FORMAT=0×10000002
ID_VIDEO_BITRATE=7700000
ID_VIDEO_WIDTH=720
ID_VIDEO_HEIGHT=480
ID_VIDEO_FPS=29.970
ID_VIDEO_ASPECT=0.0000
ID_AUDIO_FORMAT=8192
ID_AUDIO_BITRATE=0
ID_AUDIO_RATE=0
ID_AUDIO_NCH=0
ID_LENGTH=5193.03
xscreensaver_disable: Could not find XScreenSaver window.
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 480 (preferred colorspace: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale…
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try adding the scale filter, e.g. -vf spp,scale instead of -vf spp.
VDecoder init failed
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2))
==========================================================================
ID_VIDEO_CODEC=mpeg12
==========================================================================
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000)
ID_AUDIO_BITRATE=448000
ID_AUDIO_RATE=48000
ID_AUDIO_NCH=2
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
ID_AUDIO_CODEC=a52
Starting playback…
VDec: vo config request - 720 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
ID_VIDEO_ASPECT=1.7778
VO: [x11] 720×480 => 854×480 Planar YV12 [zoom]
X11 error: BadAccess during XSelectInput Call
X11 error: The ‘ButtonPressMask’ mask of specified window has probably already used by another appication (see man XSelectInput)
X11 error: MPlayer discards mouse control (reconfiguring)
X11 error: BadAccess during XSelectInput Call
X11 error: The ‘ButtonPressMask’ mask of specified window has probably already used by another appication (see man XSelectInput)
X11 error: MPlayer discards mouse control (reconfiguring)
SwScaler: using unscaled yuv420p -> bgr565 special converter
[Mixer] No hardware mixing, inserting volume filter.

MPlayer interrupted by signal 11 in module: decode_video
ID_SIGNAL=11
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with –enable-debug and make a ‘gdb’ backtrace and
disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn’t happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it’s MPlayer’s fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can’t and
won’t help unless you provide this information when reporting a possible bug.

By 小兔黑黑 on May 20, 2008

我與樓上遇到相同的問題 (In EeePC 901 Linux)
只要把xepc加入套件庫source list
就會自動更新到有問題的mplayer

By 大鳥 on Jul 30, 2008