Eee PC to use Bluetooth to send and receive files to do
January 5, 2008 - 9:29 pm Eee PC in order to add Bluetooth functionality, it must install kdebluetooth.
However, ASUS is using the Xandros version of KDE, even naming version of Debian with a bit of difference
Can not be installed directly to Debian version of the kdebluetooth, it is the only Canal to the source code for the Sounds.
Sounds made to the original kdebluetooth difficult than imagined, because the KDE development of the necessary software does not,
Even so kdelibs, kdebase, kdeutils, kdepim also a hard re-explain it.
A busy day, finally finished, use the following:
XEPC.org together with the first software library (methods of reference before the article).
Re-implementation of sudo apt-get update to update the database, the final implementation of sudo apt-get install kdebluetooth
Automatically install all the necessary things. 
Eee PC is not used as a normal boot mode, dbus with bluetooth services are not open, so
Prior to want to use Bluetooth to a number of input terminals in order to open the Bluetooth support:
sudo / etc / init.d / dbus start
sudo / etc / init.d / bluetooth start
kbluetooth &
Bluetooth will appear in the lower right corner of the icon, right-click with the mouse can KBlueMon open the program to scan a Bluetooth cell phone,
Of course, you must first open the phone's Bluetooth. 
Can send files to the phone. 
Can also receive files (in the first right-click menu of choices available to local detection - Discoverable). 
The speed of the file to receive good! 
[1/2/2008]
Updated look and found the original KDE bluetooth will be keeping an eye / etc / bluetooth / hcid.conf this file, can match the operation,
In the previous bluetooth software hcid.conf will be designated passkey, later modified by the agent to do the matching action,
KDE bluetooth, but the original back to the old methods used in hcid.conf read a passkey option to do the matching.
So long as hcid.conf in the "option" paragraph like this will become a passkey into, improved after the restart.
My / etc / bluetooth / hcid.conf:
options {
autoinit yes;
security auto;
pairing multi;
passkey "0000";
}
device (
name "% h-% d";
class 0 × 3e0100;
# pkt_type DH1, DM1, HV1;
iscan enable; pscan enable;
lm accept;
lp rswitch, hold, sniff, park;
)
52 Responses to "Eee PC to use Bluetooth to send and receive files to do"
Bluetooth is not only the file is sent. Can not know to connect mobile phones to access it?
By Daniel on Jan 7, 2008
Internet phone connections need to match, Eee PC does not match with the PIN / Key helper.
Tried before, and matching the success of dial-up, but a bit difficult to use for beginners, who are looking for easy-to-use.
By lazyfai on Jan 7, 2008
I ask you!
There is no way to allow computers to control Bluetooth mobile phone Ah! ?
(Like http://www.mobile01.com/topicdetail.php?f=110&t=16515&last=4323229)
By rexshue on Jan 8, 2008
In the same issue of a link in the match.
KDE bluetooth mobile phone has Bluetooth support when using the mouse or control openoffice presentation, and so on, but the pair must hurdle before the program referred to do ...
By lazyfai on Jan 9, 2008
The use of the boy or the original linux, thanks to significant way, with mobile phones present between the transmission problem does not appear, however, if other nb-file over to the eeepc, the other can be found eeepc, but when the file - Will be asked to match the (eeepc no GUI on the Mozhe) please find a match much faster than the GUI it, or please tell whether there is a matching method or test can be ordered.
Borrow in the future only Bluetooth mouse to try to see if it can be used.
Dial-up can look forward to the GUI as soon as possible, it can support 3.5G mobile phones to buy online.
By nakazima on Jan 9, 2008
Thank you much, and I use the original linux, I hope to work out how to use the greatly gmlive or gsopcast
By jack on Jan 9, 2008
In eeeuser forum to find a Bluetooth Internet with the post, seems to be able to access through mobile phones. Basically, I do not know, do not know if a solution can lead this painting solution?
http://forum.eeeuser.com/viewtopic.php?id=2280&p=1
By Daniel on Jan 9, 2008
I have read, but also what to do even less, if so easy to be just fine.
By lazyfai on Jan 10, 2008
I would like to ask Is that support e-blue is not a new one o the bluetooth only slim fingers ga?
Today, I bought a bt of e-blue fingers, but you can not scan my hand, but the old problem of not only
By Morris on Jan 13, 2008
Would like to ask whether this can not be
http://www.e-blue.jp/Product/ViewProduct.aspx?Ser_Id=309&Cat_ID=9
??
By Morris on Jan 21, 2008
I am sorry, because it's not the hardware, not sure of your answer.
But you can use the old, said that Linux normal bluetooth hardware, the new can not see, there are 2 possible, it is a fact supported, but the driver ignored it should be because it is a new chip, Not in the driver source code it is defined, and the other is likely that this chip can not drive the current program, even if the increase in the chip into the type of driver, but does not support.
By lazyfai on Jan 21, 2008
i typed the steps u told me n after the last sentence typed kbluetooth & n its said "bash: kbluetooth: command not found
how can i make it works??
By Isabella on Jan 26, 2008
Hi, FAI
I finally can installed the function but when at last i typed th sudo / etc / init.d / bluetooth start kbluetooth &
it shows [1] 16634
n next line its said> Starting bluetooth: hcid sdpd sdp_options rfcomm
what does it means?
many thanks
Isabella
By Isabella on Jan 28, 2008
3 Lines:
1. / Etc / init.d / dbus start
2. / Etc / init.d / bluetooth start
(you should see Starting bluetooth: hcid sdpd sdp_options rfcomm)
3. Kbluetooth &
Then you should be able to see a bluetooth icon near bottom right corner.
Step 1 and 2 can be skipped if you make use of / etc / fastservices as in other passage.
By lazyfai on Jan 28, 2008
Hi Fai,
yes i can open the bluetooth:-konqueror
window but the eeepc seems cannot recognize my sony ericsson p1i, is there any button that i can click again to make them receognise each other once more? i cannot get the window like your mobile recognize with your eeepc does as shown in your example.
please help
Isabella
By Isabella on Jan 29, 2008
May i ask is it still need to plug-in a bluetooth finger or something since when i move the cursor to the bluetooth logo on eeepc it show a box say 'no bluetooth adapter', then is it means needs to plug-in a usb bluetooth adapter??
thanks
Isabella
By Isabella on Jan 29, 2008
Yes you need bluetooth device plugged in ...
By lazyfai on Jan 29, 2008
Fai,
Many thanks
Isabella
By Isabella on Jan 29, 2008
Eeepc on the phone with the pair:
First of all, would like to thank Asus, eeeuser.com, XEPC.org, and lazyfai.
Eeeuser.com read the page in the day, that seems to increase the number of a "passkey-agent" software. Source in the "/ usr / share / doc / bluez-utils / examples" where. Debian Etch I compile a computer. In a test on Eeepc. Because Bluetooth is not cooked, as if there is no problem. :-) Not sure. Eeepc on the way:
1, passkey-agent-default 1234 &
2, rfcomm connect 0 00:11:22:33:44:55:66
3, your phone will ask you not to "GRANT"?
4, type "YES"
5, your phone will ask "Password"?
6, you type "1234"
This can be a match. Imitation is not interested in trying.
I do not know where I can wear compile the program?
By nyu on Jan 30, 2008
re: nyu
I use Slackware on the success of the Bluetooth pairing agent, but taking into account the possible new face considerable problems, has been looking for a GUI program.
You can put your program to send my email: lazyfai@gmail.com
By lazyfai on Jan 30, 2008
I would like to ask the Matching GUI has been completed it?
If there is no GUI, written in fixed commend the config or whether it can be??
Bluetooth mouse tried without success, and other communication NB not match, another Taiwan-NB not to file eeepc (but can eeepc-file to other NB)
By nakazima on Jan 31, 2008
passkey-agent is not a GUI program. It is to "Terminal Mode" in the implementation of ... ... ..
Email now to you.
By nyu on Jan 31, 2008
KDE with GNOME have a Bluetooth pairing GUI program, but I still can not find how we can get into the Eee PC ... because even in the package do not know what to do to take some time to look at.
If the success of the pair can even be used to connect through the Internet.
By lazyfai on Jan 31, 2008
This is the implementation of the "passkey-agent" after the pair's plans:
http://farm3.static.flickr.com/2240/2232529608_d826dee36c.jpg
By nyu on Jan 31, 2008
I would like to ask how we can get more map?
By nyu on Jan 31, 2008
Hi,
I have tried the passkey-agent, it can make my mobile recognize with the eeepc, but cannot fail the process of the password n my mobile finally said "link failed", since inside the "Terminal Mode" its mentioned command not found but still my mobile can show the name of the eeepc on the search page since may be i did not get the source code? may be? if there is a process pictures that will help us alot
thanks
Isabella
By Isabella on Jan 31, 2008
There is no need to use passkey-agent to send / receive file, actually sending / receiving files no need to do the pair up process, please don't do that, you can detect and send directly, like sending files to your friends' mobile phone.
What you need to do is ONLY running "kbluetooth", and then you can use the right bottom side icon to start the sending and receiving file process.
By lazyfai on Jan 31, 2008
Hi Fai,
I found that the link between my mobile n the eeepc did already exist b4 i apply nyu said's command (bcoz i did create the link between them by using Fai mentioned command)
however i was stucked by my mobile ask for the passward and i cannot get thru, does anyone know what's the password of the command? or the password of the eeepc (not the one set at the first time of the eeepc set-up since i did tried my own password set in the eeepc )????
Isabella
By Isabella on Jan 31, 2008
For myself, I didn't create any pair with my mobile.
What I have to do is exactly the steps in the tutorial.
Afterward, I can scan the phone's name, and then from the Eee PC, I select a file to send to the phone, on the phone side, just need to "accept" the file, then all things done.
What is your phone model? I found that some of the phone need to do pair up before sending / receiving files but most of them don't need.
By lazyfai on Jan 31, 2008
Hi Fai,
Thanks i can do that with my SE p1i now i test with my photos transfering action n it works!! Really thanks
Isabella
btw: i wish to go to the gathering this sat but i cannot need to work. may be next time
By Isabella on Feb 1, 2008
Hi Fai,
i can link it up finally as i go to the terminal page n added one word then it can syn together now thanks for your help, and further now, i would like to know how can my eeepc surf on-line thru my mobile by using bluetooth?
Many thanks
Isabella
By Isabella on Feb 2, 2008
Fai,
I tried to input the 3rd line but I get "kbluetooth & n its said" bash: kbluetooth: command not found ".
Please help!!! I don't see the bluetooth icon.
Thanks in advance.
Chas
By Chas on Feb 22, 2008
Re-starting the problem, because the eeepc 900 Zhuangwan kdebluetooth after kbluetooth & implementation of an error window, "The application Kbluetooth crashed and caused the singal 11 (SIGSEGV), I would like to ask whether the eeepc 900 because of what you change??
By Nakazima on Apr 25, 2008
Re: Nakazime please check with dbus in the implementation of bluetooth services, in the / etc / fastservices should have dbus line with bluetooth 2. In addition, I found the Eee PC 900 do not seem to have a bluetooth-related files .... For example, is libbluetooth2.
By lazyfai on Apr 25, 2008
Dbus concerned with some of the bluetooth start, is determined to do, but still the same error message, because the current Bluetooth eeepc open only in this way the most effective, if not in this way, there probably is no other solution, Because the text has referred to the need to be recompiled, so speculation is that some components in the eee 900 not installed or how the initial libbluetooth2 see in the synaptic is installed, but also lazyfai much trouble re-check about La
By Nakazima on Apr 25, 2008
Ah, there is a way to check run dbus, take a look at the terminal to see if there are any programs in the run dbus:
ps-ax | grep dbus
And then see if there is a bluetooth program in the running:
ps-ax | grep sdp
By lazyfai on Apr 25, 2008
Dbus if bluetooth or not to run, an error window (not concole of error),
Can't connect to DBus!
Unable to start kbluetooth.
Restart dbus and the bluetooth service
So please lazyfai greatly help in KDEbluetooth look at the relevant program Hello
By Nakazima on Apr 28, 2008
Re: Nakazima
But it seems like dbus, might try to run this way:
1. Sudo / etc / init.d / dbus restart
2. Sudo / etc / init.d / bluetooth restart
3. Kbluetooth
By lazyfai on Apr 28, 2008
Either start or restart, the following unusual window, ask your lazyfai greatly eee 900 can be used successfully kbluetooth it?
[URL = http://img233.imageshack.us/my.php?image=kbluetootherrorwn3.png] [IMG] http://img233.imageshack.us/img233/752/kbluetootherrorwn3.th.png [/ IMG] [ / URL]
By Nakazima on Apr 28, 2008
brother, failed on the last step with err: software package not found (can not find the package) "pls help ....
By bae on May 4, 2008
Re: Nakazima
After the test, Eee PC 701 with 900 of the kdebluetooth are normal.
By lazyfai on May 4, 2008
I would like to ask lazyfai greatly, the use of kdebluetooth the current version is this?
Whether the use of apt-get install kdebluetooth or use synaptic to install, and are 1.0 ~ beta8-3 + eeepc1
I would like to ask this version is correct?
By Nakazima on May 7, 2008
Boy impression of the past 701 years is 0.90 stable version, but 701 have since changed hands found the real situation
However, if we retreat to version 0.90 stable, synaptic will be out of a pile of packages to remove, so did not dare test
Lazyfai much would like to re-confirm which version in the end can be used in the 900?
By Nakazima on May 12, 2008
Re: Nakazima
XEPC.org software library "http://updates.xepc.org/pool-main/k/kdebluetooth/" has always been that there is only one version is 1.0 beta8, I would like to ask you to use the previous version of what is to be paid? If Is 0.99, which should take over from the Debian, the.
By lazyfai on May 12, 2008
Really can not have a test, because the 701 has been replaced
It is a pity, from 701 to start with Bluetooth, into the 900 series has been unable to find the cause of crash
I do not know is not too early to advanced irrigation eeepc on other packages mode or not installed
But first, or Xiela ~ ~
By Nakazima on May 12, 2008
Re: Nakazima
Would you use the / etc / apt / sources.list in what?
There are about what programs to install?
By lazyfai on May 12, 2008
The installation of a lot of things, the synaptic log can give you reference it?
By Nakazima on May 13, 2008
Re: Nakazima
Can ah, reference.
There dpkg-l output.
By lazyfai on May 13, 2008
Thanks for your feedback. I do not know your personal e-mail address.
I try to put the "dpkg-l" result in google document and send the message by your MSN address in your blog.
If you did not receive any one, please inform me by the E-mail.
By Nakazima on May 13, 2008
In accordance with the above methods of installing, my eeepc 900 also appeared in front of friends with the same error message, 'The application KBluetooth crashed and caused the signal 6 (SIGABRT) ". Press ok after, session will appear in the" / home / user> *** Glibc detected *** malloc (): memory corruption (fast): 0 × 08115e48 *** KCrash: Application 'kbluetooth' crashing ... "may therefore not be blumon icon in the lower right corner. However, to their own Kbluemon implementation of the kbtobexclient and can be successfully captured the Bluetooth device to send the file.
I would like to ask whether there are ways to solve the problem not to see these mistakes?
By Julia on Jun 4, 2008
Have no hope but to see Julia's post, immediately tried to, was an error message, but it will still be able to kbluemon and implementation of the kbtobexclient,
1. Eeepc 900 but to send file to another computer "A", the computer will be "A" matching option appears, is that my eeepc matching requirements, enter the password, enter the correct password, but still will be Failure of the match, of course, also failed to send
2. Then the computer "A" search for the implementation of Bluetooth devices will be able to find my eeepc 900
3. When I was a computer from "A" with matching eeepc, the computer "A" matching options screen appears, enter the requested password, on the successful, in my computer "A" and have eeepc 900 matching the success of the state However, there is no place in the eeepc has revealed that the pair record
4. Repeat step1, from the eeepc 900 can file to the computer-"A" of the
5. However, you want the computer from "A" send the file to eeepc 900 but also how not to try out, did not find any place where you can use
What a pity, almost as if Tadao said to the finish line from the other computer can not over-file it is a headache
However, a state in the past, I eeepc 701 is the first to get Bluetooth, then use Tad greatly in his blog referred to the full desktop version of the advanced method to install a deb file, then kbluetooth can be used.
But in the eeepc 900 is the first implementation of the advanced desktop approach, and then install kdebluetooth, will not be the problem caused by it?
By Nakazima on Jun 4, 2008
A phenomenon that when dbus, bluetooth all start state, but not to insert an external Bluetooth USB, when kbluetooth & implementation, the status bar in the lower right corner will appear gray, but as long as the Bluetooth logo Bluetooth adapter to insert a USB port, appear immediately crash scene did not know whether Julia is the case?
By Nakazima on Jun 11, 2008